Download  Print this page

Wand Emulation; Data Block Size - Honeywell 4600RSF051CE User Manual

Commercial/retail/industrial area imager.
Hide thumbs

Advertisement

In Wand Emulation mode, the imager decodes the barcode then sends data in
the same format as a wand imager. The Code 39 Format converts all symbol-
ogies to Code 39.
The Same Code Format transmits UPC, EAN, Code 128, Codabar, and Inter-
leaved 2 of 5 without any changes, but converts all other symbologies to Code
39. 2D symbologies are converted to Code 128.
The Code 39 Format barcode below sets the terminal ID to 61, and the Same
Code Format barcode sets the terminal ID to 64. Default = Code 39 Format.
Code 39 Format

Wand Emulation

Note: See
"Imager Models"
your imager.
Note: Changing primary wand emulation settings also changes the secondary
wand emulation settings (see
page 6-2).

Data Block Size

This transmits the data in smaller blocks to prevent buffer overflow. Default =
40.
on page 1-2 to determine which interfaces apply to
20
60
Secondary Code 39 Wand Emulation
Same Code Format
* 40
80
on
2 - 13

Advertisement

   Related Manuals for Honeywell 4600RSF051CE

Comments to this Manuals

Symbols: 0
Latest comments: