Honeywell 4600RSF051CE User Manual page 110

Commercial/retail/industrial area imager
Table of Contents

Advertisement

Code 128 Message Length
Scan the barcodes below to change the message length. Refer to
Message
Length Description
(page 7-2) for additional information. Minimum and
Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from
the one the host program is expecting. If this is the case, scan the barcode
below, select the code page with which the barcodes were created (see
Code
Page Mapping of Printed Barcodes
on page A-6), and scan the value and the
Save barcode from the
Programming Chart
on the inside the back cover of this
manual. The data characters should then appear properly.
Code 128 Code Page
7 - 16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents