This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
EAN/JAN-13 Addenda Required
When Required is scanned, the imager will only read EAN/JAN-13 barcodes
that have addenda. Default = Not Required.
EAN/JAN-13 Addenda Separator
When this feature is On, there is a space between the data from the barcode
and the data from the addenda. When turned Off, there is no space.
Default = On.
Note: If you want to enable or disable EAN13 with Extended Coupon Code,
UPC-A/EAN-13 with Extended Coupon Code
7 - 24
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required