Serial Wedge Data Transmission Port
Using the following barcodes, set the port to which you want the scanned data
to transmit. Port 1 corresponds to P1 on the output cable and Port 2 corre-
sponds to P2 on the output cable. Choosing Both sends scanned data to P1
and P2. Default = P1.
Both P1 and P2
IBM 4683 Ports 5B, 9B, and 17 Connection
Scan one of the following "Plug and Play" codes to program the imager for IBM
4683 Port 5B, 9B, or 17.
Note: After scanning one of these codes, you must power cycle the cash
IBM 4683 Port 5B Interface
IBM 4683 Port 17 Interface
1 - 12
on page 1-2 to determine which interfaces apply to
IBM 4683 Port 9B