Download  Print this page

User-specified Reread Delay; Led Power Level - Honeywell 4600RSF051CE User Manual

Commercial/retail/industrial area imager.
Hide thumbs

Advertisement

Reread Delay only works when in
Presentation™ Mode
Short (500 ms)
Long (1000 ms)

User-Specified Reread Delay

If you want to set your own length for the reread delay, scan the barcode below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
inside back cover, then scanning Save.

LED Power Level

This selection allows you to adjust LED and aimer brightness. Off is used when
no illumination is needed. Low is used if low illumination is sufficient. High (the
default) is the brightest setting.
3 - 10
Presentation Mode
(page 3-8).
User-Specified Reread Delay
or
Streaming
* Medium (750 ms)
Extra Long (2000 ms)
Extra Long (2000 ms)

Advertisement

   Related Manuals for Honeywell 4600RSF051CE

Comments to this Manuals

Symbols: 0
Latest comments: