The Code 39 Format barcode below sets the terminal ID to 61, and the Same
Code Format barcode sets the terminal ID to 64.
Wand Emulation
Same Code Format
Wand Emulation Multi Block
Note: See
"Imager Models"
your imager.
Note: Changing secondary wand emulation settings also changes the primary
wand emulation settings (see
Delay Between Blocks
This sets the delay time between data blocks. Default = 50ms.
5ms
150ms
on page 6-1 to determine which interfaces apply to
Wand Emulation
Wand Emulation
Code 39 Format
on page 2-13).
* 50ms
500ms
6 - 3