Zenith Data Systems Z-171 PC Series Service Manual page 18

Chapter 2
Installation
This chapter discusses the basic installation of the computer. For the pur-
poses of this discussion, installation is defined as connecting the computer
to power and peripherals in preparation for use.
Preparing the Computer for
Installation
Opening/Closing the Computer
Refer to Figure 2-1 for the location of the keyboard latches. To open
the computer, press down on the front edges of the latches and slide
the latches toward the back.of the computer. Gently swing the keyboard
down into the horizontal position. To close the computer, swing the key-
board up. Hold it in the closed position and slide the latches towards
the front of the computer until they lock into place.
Figure 2-1: Opening/Closing the Computer