SSV Works X32-PHZ3V Manual page 9

DASH SPEAKER PANEL INSTALLATION
TOOLS NEEDED FOR INSTALLATION
Refer to the X3-DP6K installation manual included in the kit for a detailed installation process of the dash speaker panels.
RGB LED CONTROLLER COMMAND CENTER INSTALLATION
TOOLS NEEDED FOR INSTALLATION
- Wire Cutter - Wire Stripper
A. Install the LIT-CC RGB LED Controller Rocker Switch in an
unoccupied rocker switch opening.
NOTE:
Refer to the 230-LIT-CC User Guide for detailed operation instructions.
- T20 & T30 Torx Driver
- Crimper
A
B. Mount the LIT-CC RGB LED Controller Command Center in the
dash away from moving parts and secure with zip ties. Cut excess
zip ties for a clean install.
- 8, 10 & 13mm Socket Wrench
B
9