SSV Works X32-PHZ3V Manual page 10

RUNNING WIRE HARNESSES
AMP POWER CABLES
JVC MR1 POWER HARNESS
LIT-CC RGB CONTROLLER WIRING
10
Bus Bar
Connect the A-H1Q (x2) power/ground wire
from the amplifiers to the battery. Use the
provided fuse holder for circuit protection.
Connect the JVC MR1 to SSV adapter harness
(B-H2368) to the factory bus bar located in
the center console beside the passenger seat.
Connect the blue amp turn on wire to the
amplifiers.
Run the B-H2965 Front RGB harness from
the LIT-CC output to the dash speaker panels.
Mount the LIT-CC Controller in an empty
rocker switch slot and route the cable to the
LIT-CC RGB Controller.