SSV Works X32-PHZ3V Manual page 21

J. Route the B-H2702 sub extension harness along the center console away from any moving parts and sharp metal towards the rear of the
vehicle then connect to the B-H3081 "Y" splitter. Plug one end of the "Y" splitter to the B-H3074 2-pin extension (3 ft) to the X32-DUS10
(driver side).
CONNECTING POWER & GROUND CABLE TO BATTERY
A. Unscrew the factory nut on the negative battery terminal. Install the 2 ground cables to the screw on the ground battery terminal. Re-install
the factory nut.
B. Unscrew the factory nut on the positive battery terminal. Install the 2 power cables to the screw on the postive battery terminal. Re-install the
factory nut.
J
A
B
J
A
B
21