Examine The Filter Element; Replace The Air Filter Bowl, O-Ring, And Filter Element - Hypertherm Powermax45 SYNC Operator's Manual

Examine the filter element

Do a check of the filter element inside the air filter

bowl regularly, especially in environments that are
very dusty or very warm and humid.
Replace the filter element when it is dirty or starts

to show signs of damage. Refer to the
Powermax45/65/85/105 SYNC Parts Guide
(810490).

Replace the air filter bowl, O-ring, and filter element

1. Twist the plastic fittings
2. Put the new air filter element
plastic fittings until they lock together, approximately a
1/4 turn.
3. Clean the air filter bowl by wiping away any oil, dirt, or other
contaminants.

A yellow residue on the filter bowl often indicates that oil
is getting into the gas supply line.
4. Discard the used O-ring
5. Put the filter element inside the air filter bowl. Push down on the top plastic fitting until you hear
a click.
Powermax45 SYNC Operator Manual
until they come apart, approximately a 1/4 turn. Set the fittings aside.
1
1
in the plastic fittings. Twist the
2
, and put the new O-ring at the top of the filter bowl.
3
811470
Complete Regular Maintenance Tasks
Clean
1
2
3
7
121