Install The Air Filter Bowl And Filter Element - Hypertherm Powermax45 SYNC Operator's Manual

7
Complete Regular Maintenance Tasks

Install the air filter bowl and filter element

1. Put the air filter bowl back into place by screwing the
metal guard into the air filter assembly that is inside the
power supply.

Make sure the air filter bowl and metal guard
remain straight as you install them. Otherwise,
you may damage the threads on the metal guard.
2. Hand tighten the filter bowl by turning it to the right.
3. Reconnect the gas supply to the rear of the plasma
power supply.
4. Reconnect the power cord.
122 811470 Operator Manual Powermax45 SYNC