FIBARO SMART MODULE Operating Manual page 27

COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
COMMAND_CLASS_SWITCH_BINARY [0x25]
COMMAND_CLASS_ASSOCIATION [0x85]
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
COMMAND_CLASS_SECURITY [0x98]
COMMAND_CLASS_SECURITY_2 [0x9F]
COMMAND_CLASS_SUPERVISION [0x6C]
COMMAND_CLASS_PROTECTION [0x75]
COMMAND_CLASS_APPLICATION_STATUS [0x22]
COMMAND_CLASS_ZWAVEPLUS_INFO [0x5E]
COMMAND_CLASS_SWITCH_BINARY [0x25]
COMMAND_CLASS_ASSOCIATION [0x85]
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION [0x8E]
COMMAND_CLASS_ASSOCIATION_GRP_INFO [0x59]
COMMAND_CLASS_SECURITY [0x98]
COMMAND_CLASS_SECURITY_2 [0x9F]
COMMAND_CLASS_SUPERVISION [0x6C]
COMMAND_CLASS_APPLICATION_STATUS [0x22]
Basic to Binary Switch CC mapping
Basic is mapped to Switch Binary and reflects the state of the device.
Command
SET/REPORT
SET/REPORT 1..99 (0x01..0x63)
SET 100-254 (0x64-0xFE)
SET/REPORT
Protection CC
Command Class
Endpoint 1
Endpoint 2
Value
0 (0x00)
255 (0xFF)
Level
0%
100%
Reserved Reserved
100%
State
Off
On
On
Z-Wave specIfIcatIon
27