9: Activating Scenes - FIBARO SMART MODULE Operating Manual

14

9: Activating scenes

The device can activate scenes in the Z-Wave controller by sending scene ID
and attribute of a specific action using the Central Scene Command Class.
By default all action are activated. Change settings of parameters 40 and 41 to
disable scene activation for selected actions.
* Activating triple clicks disallows removing with this input.
** Not available for toggle switches.
actIvatIng scenes
Switch Action
Switch clicked
once
Switch clicked
twice
Switch clicked
thrice*
Switch held**
Switch released**
Switch clicked
once
Switch clicked
twice
Switch clicked
thrice*
Switch held**
Switch released**
Scene
Attribute
ID
1 Key Pressed 1 time
1 Key Pressed 2 times
1 Key Pressed 3 times
1 Key Held Down
1 Key Released
2 Key Pressed 1 time
2 Key Pressed 2 times
2 Key Pressed 3 times
2 Key Held Down
2 Key Released