Page 1
FIBARO Single Switch allows to control connected devices either via HomeKit technology (using Bluetooth® low energy) or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
Page 2
1 - Live wire 2 - Neutral wire 3 - Load wire 4 - Switch button wire 5 - Switch power wire Wire colours are only indicative, consult electrician to make sure which wire is which.
Page 3
First launch 1. Switch off the mains voltage. 2. Open the wall switch box.
3. Disconnect the wiring from the switch. 4. Switch on the mains voltage. DANGER OF ELECTROCUTION!
Page 5
5. Identify the Live wire using voltage tester. 6. Switch off the mains voltage.
Page 6
7. Connect Live wire to L terminal and power terminal of switch. 8. Connect Neutral wire to N terminal.
Page 7
9. Connect Load wire to Q terminal. 10. Connect S1 terminal to button terminal of switch.
Page 8
11. Put device and wires in and close the wall switch box. 12. Switch on the mains voltage.
Page 9
13. Open the FIBARO app and tap + icon. Application will guide you through the pairing process. Reset DANGER OF ELECTRUCUTION! 1. Open the wall switch box. 2. Press and hold the button. 3. When the LED glows yellow, release the button.