Initial Setting Screen 2 - SMC Networks HRZF010-WS Operation Manual

5.3.17 Initial Setting Screen 2

No. Item
1 REM.SD.WRITE
2 REM.COM.ERR
3 DEVICE ADRS
HRZF Series
1
2
3
Fig.5-20 Initial Setting Screen 2
Table 5-17 「Initial Setting Screen 2」
Descriptions
Store the TEMP SP and FLOW SP value
with serial communication. TEMP SP
and FLOW SP will be set to stored
value after re-turn ON the main
breaker.
Allows the selection
condition when serial communication
error occurs (WRN: Continued, FLT:
Stop).
If OFF is selected,
communication error will occur.
Allows the setting of the device
address for serial communication.
【Tips】
[▲] or [▼] key is used for selecting "Item" and move to other Initial
Setting Screens. And pressing the [ENT] key enabling to select the
setting.
Chapter 5 System Operation
POWER ON
Setting
Range
OFF、ON
of system
WRN、FLT、
OFF
no serial
1 to 32CH
DOC1046494-2
Factory
Default
ON
WRN
1
5.3 Operation Screen
5-19