SMC Networks HRZF010-WS Operation Manual page 25

◼ Reset of Emergency Off [EMO] Switch
No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may occur if disregarded.
1 Before restarting, always make sure that the cause of the emergency off condition
(The reason why the EMO switch was activated) has been eliminated from the power
supplies, the system and peripheral equipment.
2
With the cause completely eliminated, turn
the emergency off [EMO] switch clockwise to reset.
The EMO button returns to its original position.
When the system is in remote mode, the remote mode is retained despite
the power outage. Thus the system operation is to resume as the start
signal is issued from your system.
3 The screen then changes from the "Model Indication screen" to "Status screen 1" as
power is being restored to the system.
HRZF Series
Chapter 1 Safety
Fig.1-20 Reset of EMO Button
1.7 Emergency Measures
DOC1046494-2
1-19