Controlling The Cpu Unit; Creating The I/O Tables; Setting The Plc Setup; Changing The Operating Mode Of The Cpu Unit - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Controlling the CPU Unit

4-11 Controlling the CPU Unit

4-11-1 Creating the I/O Tables

1, 2, 3...

4-11-2 Setting the PLC Setup

1, 2, 3...

4-11-3 Changing the Operating Mode of the CPU Unit

1, 2, 3...
314
If the communications driver is set to the CX-Server and CX-Process Tool ver-
sion 3.0 or higher is used, the operations described in this section can be per-
formed to control the CPU Unit. These operations enable the CPU Unit to be ini-
tialized (i.e., I/O tables created or PLC Setup set) and the operating mode of the
CPU Unit to be changed without the CX-Programmer. The following operations
are possible.
• Creating the I/O tables
• Setting the PLC Setup
• Changing the operating mode of the CPU Unit
1. Select PLC Info – Create I/O Table from the Settings Menu. The PLC IO
Table Dialog Box will be displayed.
2. To create the I/O tables based on information on actually mounted Units, go
online, and select Create from the Options Menu.
1. Select PLC Info – PLC Setting from the Settings Menu.
2. Set the PLC Setup and then select Transfer to PLC from the Options
Menus to transfer the PLC Setup to the CPU Unit.
1. Go online and select PLC Operating Mode from the Execution Menu. The
Change CPU Mode Dialog Box will be displayed.
2. Select the operating mode (PROGRAM, MONITOR, or RUN) in the Mode
Field and then click the Send Button.
Section 4-11