Table of Contents
Advertisement
Setting Options
3-12-5 Function Block Diagram Tab Page
230
Scale
This option sets the zoom factor for block diagrams. (This option performs the
same function as the Scale Menu in Edit Block Diagram Mode.)
100 (default): The normal display size
50: Half of the default size
200: Twice the default size
Grid Mode
• Newly Generated Projects in LCBjj Ver. 3.0 or later
To display the grid, select the checkbox and set the grid width. The default
grid width setting is enabled and Narrow. Grids can be displayed on block
diagrams and lines can be created at the spacing for the selected grid and
moved.
• Newly Generated Project Other Than the Above
Select the checkbox (default: cleared) and select the grid width from Wide,
Middle, and Narrow. Grids can be displayed on block diagrams and lines
can be created at the spacing for the selected grid and moved.
In either case, the function will be the same as selecting Grid Mode from the
Display Mode Menu for the block diagram display mode.
Tag Display Mode
When this option is selected, CSV tag names are displayed for the function block
names of function blocks pasted on the block diagram. This option is not se-
lected by default. (This option performs the same function as the Show CSV Tag
Name command on the Change Mode Menu in Edit Block Diagram Mode.)
Color Function Block bitmap
When this option is selected, function blocks pasted in the function block dia-
gram are displayed in colors according to the type of function block. When this
option is not selected, all function blocks are displayed in gray. This option is not
selected by default.
• Adjustment blocks: Green
• Operation blocks: Light brown
• Field terminals: Pink
• User-defined blocks: Blue
• Other: Gray
Section
3-12
Advertisement
Chapters
Table of Contents
