Creating Sequence Tables; Creating A Sequence Table - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Table of Contents

Creating Sequence Tables

Use the following procedure to create a Sequence Table Block (block model:

This operation is supported for LCB05 and LCB05D only.

1. Before creating a sequence table, always select 00-LCB05 or 00-LCB05D

in the dialog box displayed for Settings/Insert/Insert LCB/LC001.

2. To convert a 00-LCB01 to a 00-LCB05 once 00-LCB01 has been selected,

use the appropriate Change LCB Type command from the Execution Menu

and then click the OK Button.

1. Right-click the 03.Sequence Control folder and select Settings/Insert/In-

sert Function Block. An Insert Sequence Control Block Dialog Box will be

2. From the sequence block names, select 302 Sequence Table. A 701.Se-

quence Table will be created in the Sequence Control folder.

Table of Contents