Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual page 309

Operation Check
1, 2, 3...
284
1. Go online and select Start from the Validate Action Menu. Alternately, right-
click and select Validate Action – Start.
The display will change to Sequence Table (Validating Action).
2. Select Edit – Start from the Validate Action Menu. Alternately, right-click
and select Validate Action – Online Edit – Start. Then select Start in the
Verify Window.
The sequence table will be automatically verified. Online editing is not pos-
sible if the sequence table data is not the same in the CX-Process Tool and
in the Loop Controller. If the data is the same, the display will change to Se-
quence Table (Online Editing).
Online editing is displayed.
Section 4-6