Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual page 142

Table of Contents

Creating Function Block

3. Click the right mouse button at the pasting position in the right pane. Select

Paste: Function Block from the pop-up menu.

The function blocks will be pasted as shown below.

To change the position of a function block, select the block (the cursor will

change to a hand) and drag it to the desired position.

4. The cursor will automatically be changed to a pencil icon when the cursor is

moved to the connection's start point.

5. Click the start point of the connection and double-click the end point. The

software connection will appear. To bypass the route, click the apex of the

corner so that the direction can be changed by 90.

Chapters

Table of Contents