Printing Ladder Diagrams; Printing Cross-References - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Printing

3-11-4 Printing Ladder Diagrams

Printing an Active (i.e., Currently Open) Ladder Diagram
1, 2, 3...
Printing for an LCU/LCB Element
1, 2, 3...
Printing for a Node (3 LCU Elements and 1 LCBjj Element)
1, 2, 3...

3-11-5 Printing Cross-references

Printing an Active (i.e., Currently Open) Cross-reference
1, 2, 3...
220
1. Select Edit Step Ladder Mode. (Select the step ladder block, and then select
Setting and Edit Step Ladder Program.)
2. Right-click the ladder diagram window, and then select Print Ladder Dia-
gram from the pop-up menu. The Print Dialog Box will be displayed.
3. Set the number of copies to be printed, and then click the OK Button to start
printing.
Note If there is more than one ladder diagram, click the Print Button for
each ladder diagram.
Printing Example
Condition
1. Select the LCU/LCB element from the Project Workspace, and then select
Print and Ladder Diagram from the File Menu.
2. To print all the ladder diagrams within the LCU/LCB element, select the All
check box. To select specific ladder diagrams for printing, select the Select
Area check box, and specify the start ladder diagram and the end ladder dia-
gram. (Start/End correspond to the start and end ladder diagram numbers
registered in ascending order.) You can also specify the start page. Select
the Show and Hide Buttons on each page to show and hide specific pages.
3. Click the OK Button. The ladder diagrams in the LCU/LCB element will start
printing.
1. Select the active function block files from the Project Workspace, and then
select Print and Ladder Diagram from the File Menu.
2. You can also specify the start page. Select the Show and Hide Buttons on
each page to show and hide specific pages.
3. Click the OK Button. The ladder diagrams in active function block files will
start printing.
1. Display the cross-references. (With the mnemonic code displayed, select
the Refresh Button, click the OK Button, and then select LCU/LCB. Next,
select Execution and Cross-reference.)
2. Right-click the cross-reference window, and then select Print Cross-Refer-
ence from the pop-up window. The Print Dialog Box will be displayed.
3. Set the number of copies to be printed, and then click the OK Button to start
printing.
Section 3-11
Operate Comment