Function Block Error Dialog Box Operations - Omron WS02-LCTC1-E - V2.60 REV 12-2003 Manual

System Monitor Screens
1, 2, 3...

3-14-3 Function Block Error Dialog Box Operations

1, 2, 3...
1. Click the number button for the Loop Control Unit you want to use, as shown.
Click here.
The Run/Stop Command Dialog Box will be displayed as shown.
• Loop Control Unit is stopped.
• Loop Control Unit is running.
2. Select Stop, HOT START, or COLD START, and then click the Execute
Button.
Click the Refresh Button to check and redisplay the run status of the Loop
Control Unit.
1. Click the E Button.
The Function Block Error Dialog Box will be displayed.
Note A Block database error indicates an error has occurred in the function
block database.
Section 3-14
Click here
71