Deleting A Pc - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Adding and Deleting PCs
3-2-2

Deleting a PC

1,2,3...
40
er node address, a dialog box will be displayed saying that the
selected PC is different from the connected PC.
The Node Address in the
Network Type field must be
set to this value (default
setting for Node Address:
240).
(For FinsGateway, any
setting can be used for the
node number as long as it
has not been used for
another FINS Network
node.
Default Setting for Node #:
240).
*1: This is the setting for the Host Link unit
number (used to differentiate slaves). The
setting remains 0 when connecting 1:1.
5. Enter a comment if required.
6. Click the OK Button to add the PC to the project.
1. Select the PC to be deleted from the project tree, and select Edit/Remove
DEL, press the DEL Key, or right-click and select Remove/DEL from the
pop-up menu.
2. A dialog box will be displayed asking "Do you want to delete?" Click the OK
Button.
Section 3-2
*3: Any setting may be
used, including the
default C200H
*2: Always use
SYSWAY-CV for
this setting