Omron WS02-NCTC1-E - 07-2001 Operation Manual page 44

Basic Operations
Setting the Display Format
2-3-13 Setting the Network Type
2-3-14 Help
Displaying the Help
Contents
Data in the active data editing window can be displayed in either decimal or
hexadecimal. The default display format is set in the option settings.
1,2,3... 1. Select the data for which the display format is to be changed, and either
right click, or click View/Change display.
2. Click either Hexadecimal or Decimal as desired.
Note 1. The display format can also be changed by right clicking in the editing win-
dow, and selecting either Decimal or Hexadecimal from the pop-up menu.
2. Hexadecimal cannot be used if the unit setting is either millimeter or inch.
Use decimal display.
Set the network type for online connection to the PC with FinsGateway. For
details, refer to 6-2 FinsGateway Configuration and Startup.
1,2,3... 1. Click Help/Contents. The table of contents for help will be displayed.
2. Click an item to display information relating to that item.
Section 2-3
33