Omron WS02-NCTC1-E - 07-2001 Operation Manual page 26

Connecting to a PC
Connecting Cables
Unit Port on
Unit
CPU Unit Built-in
peripheral
port
Built-in
RS-232C
port
(D-SUB,
9-pin,
female)
Serial RS-232C
Communi- port
cations (D-SUB,
Board/Unit 9-pin,
female)
Other Connection
Methods
Connecting RS-232C
Cable to Peripheral Port
Unit Port on
Unit
CPU Unit Built-in
peripheral
port
Connecting
CQM1-CIF01/02 to
Peripheral Port
Unit Port on
Unit
CPU Unit Built-in
peripheral
port
Computer Port on
computer
IBM PC/AT D-SUB, 9-
or pin, male
compatible
Note When connecting the connectors of the above cables to the PC's RS-232C
port, discharge any static build-up (e.g., by touching a grounded metal object)
before touching the connectors. Although XW2Z-
anti-static XM2S-0911-E Connector Hood (thus reducing the possibility of
static build-up), be sure to discharge any static as a safety precaution.
The following connection methods can be used when connecting an RS-232C
cable to the peripheral port.
Computer Port on
computer
IBM PC/AT D-Sub, 9-
or pin, male
compatible
The following connection method can be used when connecting the conven-
tional CQM1-CIF01/02 Cable to the peripheral port.
Computer Port on
computer
IBM PC/AT D-Sub, 9-
or pin, male
compatible
FinsGateway Protocol (serial
communica- communica-
tions driver tions mode)
Serial Unit SYSWAY-CV
FinsGateway Protocol (serial
communica- communica-
tions driver tions mode)
Serial Unit SYSWAY-CV
FinsGateway Protocol (serial
communica- communica-
tions driver tions mode)
Serial Unit SYSWAY-CV
Section 2-2
Model Length
number
CS1W- 2.0 m
CN226
CS1W- 6.0 m
CN626
XW2Z- 2 m
200S-CV
XW2Z- 5 m
500S-CV
XW2Z- 2 m
200S-CV
XW2Z- 5 m
500S-CV
S -CV Cables use the
@ @ @
Model Length
number
CS1W- 0.1 m The
CN118 + (2 m or XW2Z-
XW2Z- 5 m)
@ @ @
200S-CV/ uses an
500-CV anti-static
connector.
CS1W- ---
CN118 +
XW2Z-
200S-V/
500-V
Model Length
number
CS1W- 0.5 m +
CN114 + 3.3 m
CQM1-
CIF02
Remarks
---
Uses
anti-static
connector
Uses
anti-static
connector
Remarks
S -CV
Remarks
---
15