Omron WS02-NCTC1-E - 07-2001 Operation Manual page 37

Basic Operations
26
Main Item
menu
View Project
Toolbar
Status Bar
Change Hexa-
Display decimal
Decimal Changes the display format for the
Tool Option
Online Download to NC
Upload from NC
Verify
Write Flash Mem-
ory
Monitor
Monitor Units (F)
Automatic NC
Search
Monitor NC Oper-
ating Memory Area
Monitor NC Oper-
ating Data Area
View NC Error Log Displays the error log for a specified NC
Contents
Displays/hides project tree.
Displays/hides toolbar.
Displays/hides status bar.
Changes the display format for the
active data editing window and the input
range display for the status bar to hexa-
decimal.
active data editing window and the input
range display for the status bar to deci-
mal.
Displays the option dialog box. Used to
perform the following settings.
• Font name and size
• Default display format (decimal/hexa-
decimal) for data editing windows
• Number of files displayed on the
recently used files list (16 max.)
Transfers specified data or all data to a
specified NC Unit.
Transfers specified data or all data from
a specified NC Unit to a project.
Compares editing data with the data of a
specified NC Unit.
Writes NC Unit data to flash memory.
Monitors NC Unit operating status.
Simultaneously monitors the operating
status for 4 NC Units.
Reads information about the NC Units
mounted to the PC connected online,
and automatically creates a project
based on this information. If the Upload
Data check box is enabled, all data for
the NC Units mounted to the specified
PC is read and included in the project.
Monitors the commands, NC Unit status,
I/O status, and error codes allocated to
the operating memory area.
Monitors the positions, speeds, acceler-
ation/deceleration times, sequence
numbers, and present positions speci-
fied in the operating data area.
Unit.
Section 2-3
Keyboard
shortcut
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---