Printing Data - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Printing Data

9-1 Printing Data
1,2,3...
88
Use the following procedure to print all, or specific, data. For Edit Sequence, a
specified range of data numbers can be printed.
1. On the project tree, select the data or NC Unit for printing.
2. Select File (F)/Print.
Example: The following screen will be displayed for a 4-axis NC Unit.
For a 2-axis Unit, the X axis and Y axis will be shown; for a 1-axis Unit, just
the X axis will be shown. After selecting the NC Unit, select Print to display
the screen with all the checkboxes selected. After selecting the data, select
Print to display the screen with just the specified checkboxes selected.
3. To print all data, click the Select All Button. To print specific data, select
their checkboxes. All is the default selection for the Edit Sequence check-
box. To print a specified range, click the Range Option and enter the start
and end data numbers.
4. Click the OK Button.
Section 9-1