Omron WS02-NCTC1-E - 07-2001 Operation Manual page 7

About this Manual:
This manual describes the specifications and operation of the WS02-NCTC1-E CX-Position software
and includes the sections described below. The CX-Position runs on Windows 95, 98, 2000, or NT
operating systems and is used to create data for and monitor the operation of the CS1W-NC
CJ1W-NC
@ @ @
Please read this manual carefully and be sure you understand the information provided before
attempting to install and operate CX-Position. Please read the following manuals carefully and be sure
you understand the information provided before using a Position Control Unit.
NC Unit model number
CS1W-NC113/213/413/133/233/433 CS1W-NC113/213/413/133/233/433
CJ1W-NC113/213/413/133/233/433 CJ1W-NC113/213/413/133/233/433
Section 1 provides an overview of CX-Position, its functions, and the system configuration in which it
is used.
Section 2 provides information about CX-Position installation, connecting to the PC, and basic operat-
ing procedures
Section 3 describes the procedures for creating new projects, as well as those for adding and deleting
Programmable Controllers (PCs) and Position Control Units (NCs).
Section 4 describes the procedures used to edit settings
Section 5 provides information about saving and reading files.
Section 6 provides information on default configurations for connecting online.
Section 7 provides information on data transfer and verification operations between the CX-Position
and NC Units, and about operations for writing data transferred to NC Units into the NC Unit flash
memory.
Section 8 provides information about monitoring NC Units. The NC Unit's current positions, error
codes, and status are displayed on the NC Monitor. Monitor Units are also available, displaying
sequence numbers and current positions for up to four Units simultaneously. Operating memory area
monitoring, operating data area monitoring, and NC Unit error logs can also be displayed. For details
on NC error log display, refer to 10-1 NC Unit Error Logs.
Section 9 provides information about printing data.
Section 10 provides information about NC Unit error log displays and troubleshooting.
! W A R N I N G Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
Position Control Units (referred to as NC Units in this manual).
Manual name
Position Control Units Operation Manual
Position Control Units Operation Manual
and
@ @ @
Cat. No.
W376
W397
ix