List Of Functions; Comparison With Sysmac-Nct - Omron WS02-NCTC1-E - 07-2001 Operation Manual

List of Functions

1-3

List of Functions

Group
Editing projects Create project
Create PC
Create NC Unit
Edit PC/NC Unit
Editing NC Unit Edit
data
Saving and Save
loading project
Load
files
Importing NCT Import
data files
Online Download/upload/verify
Flash memory write
Monitor
Monitor Units
Automatic project setting Used to read information about the NC Units mounted on a speci-
Operating memory area
monitor
Operating data area
monitor
NC Unit error log moni-
tor
1-4

Comparison with SYSMAC-NCT

Item
NC Unit CS1W-NC
CJ1W-NC
Created files Project files (".nci") created with the data from more than
1 NC Unit mounted on more than 1 PC (1,000 max.)
Managing and edit- Supported
ing using projects
Within a project, data can be moved or copied (see note)
in units of NC Units using "drag-and-drop" and "copy-
and-paste" operations. (Data can be moved or copied
within the same PC or between PCs.)
Note The data at the NC Unit to which data is copied is
6
Function
Used to create project files (".nci").
Used to specify a PC model and add PC data to a project.
Used to specify an NC Unit model and add NC Unit data to a PC
in a project.
Used to perform editing for a project, such as making property set-
tings for or deleting PCs or NC Units, cutting, copying, or pasting
NC Units, pasting NC Unit data, and drag-and-drop.
Used to edit the NC Unit
data shown on the right.
Used to save all the data in a project as a project file (".nci").
Used to read a project file (".nci") to a project.
Used to import data files created with SYSMAC-NCT to CX-Posi-
tion projects.
Used to download, upload, or verify data.
Used to write data to flash memory.
Used to display the sequence number, present position, I/O sta-
tus, and error code for an NC Unit.
Used to display the sequence numbers, present positions, I/O sta-
tuses, and error codes for 4 NC Units.
fied PC connected online, and creates a project tree based on
this. If the data upload check box is turned ON, the data for all NC
Units on the specified PC is read and included in the project.
Used to monitor the CPU Unit's operating memory area.
Used to monitor the CPU Unit's operating data area.
Used to monitor items (20 max. per NC Unit) in NC Unit error logs. page 92
CX-Position
@ @ @
@ @ @
overwritten. Icons are not copied along with the
data.
Details
Parameter data
Sequence data
Speed data
Acceleration/deceleration time data
Dwell time data
Zone data
SYSMAC-NCT
C200HW-NC
@ @ @
C500-NC
@ @ @
Data files (C200HW-NC: ".ncm"; C500-
NC: ".ncl") created with the data from 1
NC Unit
Not supported
All data is handled together. (Moving
and copying in units of NC Units is not
possible.)
Section 1-3
Page
page 38
page 39
page 41
page 41
page 55
page 56
page 58
page 59
page 60
page 61
page 64
page 65
page 65
page 74,
page 75,
page 77
page 78
page 82
page 82
page 42,
page 76
page 83
page 84