Appendix B: Setting Up A Tftp Server; Set Up A Tftp Server; In A Linux Environment; In A Windows Environment - CyberData Part #010861 930106D Operation Manual

Appendix B: Setting up a TFTP Server

B.0 Set up a TFTP Server
Upgrading the VoIP Loudspeaker Amplifier firmware requires a TFTP server on which you access
the Web interface where you can upload the firmware files.
B.0.1 In a LINUX Environment
To set up a TFTP server on LINUX:
1. Create a directory dedicated to the TFTP server, and move the files to be uploaded to that
2. Run the following command where
B.0.2 In a Windows Environment
You can find several options online for setting up a Windows TFTP server. This example explains
how to use the Solarwinds freeware TFTP server, which you can download at:
http://www.CyberData.net/support/voip
To set up a TFTP server on Windows:
1. Install and start the software.
2. Select File
3. Make a note of the default directory name, and then move the firmware files to be uploaded to
4. You can find several options online for setting up a Solarwinds server. This example explains
VoIP Loudspeaker Amplifier Operations Guide
directory.
Step 1: the directory that contains the files to be uploaded. For example:
in.tftpd -l -s /tftpboot/your_directory_name
/ /
Configure Security tab
that directory.
how to use the Solarwinds freeware TFTP server, which you can download at:
http://www.CyberData.net/support/voip
is the path to the directory you created in
/tftpboot/
/
Transmit Only.
930106D CyberData Corporation
31