Set Up The Loudspeaker Amplifier - CyberData Part #010861 930106D Operation Manual

18 Installing the VoIP Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters

2.3.3 Set up the Loudspeaker Amplifier

Web Page Item
Device Name
Select Speaker Function
Change Web Access Username
Change Web Access Password
Re-enter New Password
Speaker Tone Before Paging
Speaker Tone After Initialization
CyberData Corporation
1. Click the Speaker Setup button to open the Speaker Setup page. See
2. On the Loudspeaker Amplifier Setup page, enter values for the parameters indicated in
Table 2-10.
Table 2-10. Loudspeaker Amplifier Setup Parameters
Figure 2-11. Loudspeaker Amplifier Setup
Description
Enter a descriptive name for this device (if desired).
Select SIP or MGROUPS.
Use this field to change the Web Access Username.
Use this field to change the Web Access Password.
Use this field to re-enter a new password.
Enable/Disable the speaker tone (beep) before each page.
Enable/Disable the speaker tone (beep) after the system
startup.
930106D
Figure 2-11
VoIP Loudspeaker Amplifier Operations Guide