Intended Audience; General Precautions; Safety Precautions; Operating Environment Precautions - Omron DEVICENET#05-2003 Operation Manual

Intended Audience

1

Intended Audience

2

General Precautions

!WARNING
3

Safety Precautions

!WARNING
!WARNING
4

Operating Environment Precautions

xii
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, and other systems, machines, and equip-
ment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating OMRON PC
Systems. Be sure to read this manual before attempting to use the software
and keep this manual close at hand for reference during operation.
It is extremely important that a PC System and all PC Units be used for the
specified purpose and under the specified conditions, especially in applica-
tions that can directly or indirectly affect human life. You must consult with
your OMRON representative before applying a PC System to the abovemen-
tioned applications.
Never attempt to disassemble any Units while power is being supplied. Doing
so may result in serious electrical shock or electrocution.
Never touch any of the terminals while power is being supplied. Doing so may
result in serious electrical shock or electrocution.
Do not operate the control system in the following places.
• Locations subject to direct sunlight.
• Locations subject to temperatures or humidity outside the range specified
in the specifications.
• Locations subject to condensation as the result of severe changes in tem-
perature.
• Locations subject to corrosive or flammable gases.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to shock or vibration.
• Locations subject to exposure to water, oil, or chemicals.
1