Omron DEVICENET#05-2003 Operation Manual page 167

GT1-TS04T and GT1-TS04P Temperature Input Units
11. From the Edit Device Parameters Window for the Communications Unit,
click Write to Device.
The specified input ranges will be set in the Temperature Input Unit. At this
stage, however, the settings are not enabled.
12. From the Edit Device Parameters Window for the Communications Unit,
click Reset.
The Communications Unit and all the I/O Units connected to the Commu-
nications Unit will be reset, and the specified parameters (for example, for
input ranges) will be enabled.
Note The settings will be enabled when the power supply to the Commu-
nications Unit is turned OFF and ON again even if Reset is not
clicked at this time.
Section 5-3
157