Gt1-Id16Ds Transistor Input Unit With Connector (Npn) - Omron DEVICENET#05-2003 Operation Manual

Transistor Input Units
Dimensions
4-3-7

GT1-ID16DS Transistor Input Unit with Connector (NPN)

Input Specifications
Cables with Connectors
When a Transistor Input Unit with a high-density connector is to be connected
to an OMRON I/O Block or a Connector-Terminal Block Conversion Unit, use
the cables listed in the following table (sold separately).
Manufacturer
OMRON
Note The vertical center of the Unit is 4.9 mm lower than the center of the DIN
track. The Unit therefore extends downward 41.4 mm (including the mounting
hook) from the DIN track center.
Number of input points
Number of points that can be ON simultaneously
Note The number of input points that can be ON simultaneously depends
on the ambient temperature, as shown below.
Max. No. of input points
Model number
XW2Z-@@@A Connector-Terminal Block Conversion
Unit
Approx. 59
Item
Section 4-3
Device
XW2B-20G4 or
XW2B-20G5
(Unit: mm)
Specifications
16 points
16 points max.
Ambient temperature ( C)
57