Download Print this page
Omron DRT1-COM Instruction Manual
Omron DRT1-COM Instruction Manual

Omron DRT1-COM Instruction Manual

Communication unit
Hide thumbs Also See for DRT1-COM:

Advertisement

Available languages

Available languages

Quick Links

DRT1-COM
COMMUNICATION UNIT
INSTRUCTION MANUAL
Thank you for purchasing this OMRON product.
This manual primarily describes precautions required in installing and
operating the digital controller. Before operating the product, read this
manual thoroughly to acquire sufficient knowledge of the product. Keep
this manual for future reference.
Ky
OMRON Corporation
To ensure safe and correct use of this product, also read the following
manuals:
dealer.
Items shown below are necessary for safe usage.
faulty operation.
high-tension lines.
might result in trouble or faulty operation.
cables are firmly connected.
discolor the surface.
Supply.
● Ratings
Internal Current Consumption
Inrush Current
Ambient Temperature
C
Ambient Humidity
Storage temperature
C
Installation
Mounted in a panel
Total distance
baud rate
Network distance
Network distance
branch distance
Total branch distance
(thick cable)
500kbps
100m max.
6m max.
39m max.
250kbps
250m max.
6m max.
78m max.
125kbps
500m max.
6m max.
156m max.
Connector
DRT1−COM
COMMUNICATION UNIT
MS
NS
TS
No.
Communication Connector
↑ON
Internal power Terminal
The meanings of the MS, NS and TS display as follows.
LED name
LED Display Color
State
Description
Lit
Green
Flashing
MS
Lit
Red
Flashing
Out
Lit
Link OK On-line, Connected
Green
Flashing
On-line, Not Connected
NS
Lit
Red
Flashing
Connection Time-Out
Out
Lit
Normal
Green
Flashing
TS
Red
Lit
Out
DRT1−COM
COMMUNICATION UNIT
MS
NS
TS
No.
function caused by static electricity.
Mount the product shown below.
DRT1−COM
COMMUNICATION UNIT
MS
NS
TS
No.
↑ON
Set the node address.
Communications Speed
ON
ON
setting impossible
ON
ON
ON : Hold.
f
● Connecting Communication Cables
DRT1−COM
COMMUNICATION UNIT
MS
NS
TS
No.
Black ( V−)
Blue ( CAN L)
Shield wire
White ( CAN H)
Red ( V+)
Terminating connector
DRT1−COM
COMMUNICATION UNIT
MS
NS
TS
No.
Terminating connector must be on the end unit.
adherence to limitations of the ratings and functions. Also, take countermeasures
for safety precautions such as fail-safe installations.
struction manual.
After Sales Support

Advertisement

loading

Summary of Contents for Omron DRT1-COM

  • Page 1 Storage temperature Installation Mounted in a panel ● Connecting Communication Cables ■ Thank you for purchasing this OMRON product. ● This manual primarily describes precautions required in installing and operating the digital controller. Before operating the product, read this 8...
  • Page 2 ■仕様 ■外形寸法(単位:mm) ■配線 ●定格 ●内部電源の接続 通信電源電圧 DC11∼25V DRT1−COM 6.0mm以下 COMMUNICATION UNIT 通信電源電流 30mA M3 用 内部電源電圧 DC20.4∼26.4V DRT1-COM 6.0mm以下 形  通信ユニット 内部電源電流 0.6A以下 (DC20.4V時) ユニ ッ ト消費電力 最大4W (DC24V時) 突入電流 最大30A 使用周囲温度 -10∼55 C + − 使用周囲湿度 25∼85% (結露のないこ と)...