Setting Symbol Names And I/O Comments For Use As Labels - Omron CX-DESIGNER V2.1 - 07-2007 User Manual

Setting Symbol Names and I/O Comments for Use as Labels

Transfers between the PT
and a Memory Card
1,2,3...
4-15 Setting Symbol Names and I/O Comments for Use as
Labels
68
When a project for which data transfer security has been set is stored in the
PT, a password must be input at the PT to upload the project data from the PT
to a Memory Card. Data cannot be uploaded from the PT unless the correct
password is input, preventing theft of data to a Memory Card. A password is
also required to download data from a Memory Card. This prevents data from
being accidentally overwritten.
NS-series PT
Upload
Download
Password input from the PT
When data transfer security is set
Procedure
1. Select File - Data Transfer Security - New Data Transfer Security Set-
ting.
2. Set the security password.
3. Transfer to the PT the project for which data transfer security has been set.
Symbol names or I/O comments of communications addresses can be auto-
matically used as label text strings for the following functional objects.
• ON/OFF Buttons (when Write Address is set)
• Word Buttons (when Write Address is set)
• Bit Buttons (when Display Address is set)
• Word Lamps (when Display Address is set)
In the same way, when setting communications addresses in the Alarm/Event
Details Dialog Box, symbol names or I/O comments can be set as the alarm
messages.
Memory Card
The symbol name of the
communications address is
automatically used as the label.
Section 4-15
Set the communications
address.