Shielded Connector Wiring And Assembly - Omron C200HW-SRM21-V1 - 08-2007 Operation Manual

Section 5-4
Water-resistant Terminals
SRT2–OD08CL, SRT2-OD08CL-1
10
Mounting dimensions
Three, 5.3 dia. or M5 holes
(Unit: mm)
Note For details on the communications cable, I/O power supply, and I/O wiring,
refer to Communications Cable, I/O Power Supply, and I/O Wiring on
page 275 under 5-4-1 SRT2-ID @@ CL (-1) Water-resistant Terminals with 4 or
8 Transistor Inputs.
5-4-3

Shielded Connector Wiring and Assembly

Connect external I/O power supply and I/O Units to Water-resistant Terminals
through Shielded Connector (round Water-resistant connectors). Water-resis-
tant Terminals has a male plug for the external power supply connector and a
female socket for the I/O connector. Select ones from the following XS2-series
Round Water-resistant Connectors according to the I/O power supply method
or the I/O Unit.
284