Srt@@-Id@@ (-1) Remote Terminals With 4, 8, Or 16 Transistor Inputs; Srt@-Id16T (-1) Remote Terminals With 16 Transistor Inputs (And 3-Tier Terminal Blocks) - Omron C200HW-SRM21-V1 - 08-2007 Operation Manual

Remote Terminals
5-1-2 SRT@-ID16T (-1) Remote Terminals with 16 Transistor Inputs (and
3-tier Terminal Blocks)
Specifications The following tables show the ratings and input specifications for the SRT@-
ID16T (-1) Remote Terminal.
Ratings
Item
Models
Input points
Communications mode
Terminal
Power supply type
Communications power
supply voltage
I/O power supply voltage
Current consumption
(See note.)
Noise immunity
Vibration resistance
Shock resistance
Dielectric strength
Ambient temperature
Ambient humidity
Operating environment
Mounting method
Mounting strength
Terminal strength
Node number settings
Weight
Note The current consumption is the value with all 16 points turned ON excluding
the current consumption of the external sensor connected to the input Remote
Terminal and the current consumption of the load connected to the output
Remote Terminal.
Specification
SRT1-ID16T
SRT1-ID16T-1
SRT2-ID16T
SRT2-ID16T-1
SRT@-ID16T: 16 points (NPN)
SRT@-ID16T-1: 16 points (PNP)
SRT1-ID16T (-1): High-speed Communications Mode
SRT2-ID16T (-1): High-speed Communications Mode
and Long-distance Communications
Mode
3-tier terminal block (with common I/O terminal for each
input point)
Multiple power supplies
14 to 26.4 V DC
(Power can be supplied from the communications cable)
20.4 to 26.4 V DC (24 V DC
Communications power: 50 mA max. at 24 V DC
±1.5 kVp-p with a pulse width of 0.1 to 1 µs and a rise
time of 1 ns (via impulse noise simulator)
10 to 150 Hz, 1.0-mm double amplitude or 70 m/s
2
Malfunction: 200 m/s
500 V AC (between insulated circuits)
1,000 V AC for 1 minute (1-mA sensing current, between
charged and uncharged sections)
Operating: –10 to 55°C (with no icing or condensation)
Storage: –25 to 65°C (with no icing or condensation)
Operating: 25% to 85% (with no condensation)
Storage: 25% to 85% (with no condensation)
No corrosive gases
M4 screws or 35-mm DIN track mounting
100 N in each direction
Pulling: 100 N
Tightening: 0.3 to 0.5 N • m
The node number is set with a rotary switch. (Set before
turning ON the Slave.)
300 g max.
Section 5-1
+10%
/ )
–15%
2
157