Analog Output Terminals; Srt2-Da02 Analog Output Terminal - Omron C200HW-SRM21-V1 - 08-2007 Operation Manual

Analog Output Terminals

SRT2-AD04 Dimensions
5-8

Analog Output Terminals

5-8-1

SRT2-DA02 Analog Output Terminal

318
The following diagram shows the dimensions for the SRT2-AD04. All dimen-
sions are in mm.
Mounting Holes
Two, 4.2 dia. or M4
Note To prevent damage from static electricity, mount the Unit where it cannot be
touched accidentally.
Note Do not connect the Analog Output Terminal to any of the following incompati-
ble Master Units or incorrect data may be transmitted.
PLC
CS-series, C200HX/
C200HG/ C200HE-(Z)E,
and C200HS
CS-series
CJ-series
CQM1
SRM1 (Integrated with
CPU Unit)
CPM2C-S (Integrated
with CPU Unit)
The Analog Output Unit is also incompatible with the following Master Units:
3G8B3-SRM0@ CompoBus/S VME Board
C200PC-ISA@2-SRM SYSMAC Board
SDD-CS1 NKE Corporation UNI-WIRE Send Unit
Incompatible Master Units
C200HW-SRM21
---
---
CQM1-SRM21
SRM1-C0@
SRM1-C0@-V1
---
Section 5-8
Compatible Master Units
C200HW-SRM21-V1
CS1W-SRM21
CJ1W-SRM21
CQM1-SRM21-V1
SRM1-C0@-V2
All Units