Analog Devices MAX22216-EVAL Manual page 7

MAX22216-EVAL Evaluation Board • 319-101029, Rev 1: 03/24
3.3 Onboard Connectors
The MAX22216-EVAL has seven onboard connectors. The following table contains information on the con-
nector type and mating connectors.
The connector pinning and signal names can be derived from the board design and schematic files avail-
able here: Landungsbruecke Eval System
# Connects to...
1 Power Supply
2 4x Load
3 Landungsbruecke
4 COM
Connector Type
MOLEX 0395221002
MOLEX 0395021002
46-3492-44-3-00-10-PPTR
from W+P Series 3492
Standard 2.54mm header
Table 3: MAX22216-EVAL Connectors
Description
Connects a battery or power supply to the eval-
uation board. An example of a mating connec-
tor is MOLEX 0395200002.
Connects the loads to the MAX22216 outputs.
An example of a mating connector is
0395000002.
Main I/O and digital supply connector to con-
nect to the Landungsbruecke controller board
through the Eselsbruecke connector or to con-
nect to an own controller board.
Use to connect COM to +VM or GND through a
jumper.
7/17
MOLEX