Configuring The Menu Language Of The Software; Configuring The Pc In A Network - Sennheiser SDC 8000 SYS Software Manual

Configuring the menu language of the software

To display the menus and buttons of the software in a different language
immediately after program startup:
In the "Language" box on the "1" tab, click the desired option button.
Note:
You can change the menu language at any time (see "Changing the
menu language of the "Confsys" program" on page 19).

Configuring the PC in a network

If you have installed the software in parallel on several PCs, it is necessary
to specify the tasks of the PCs in the network:
Master:
Control of the conference system and/or control of the interpretation
system, access control (dongle)
Slave:
Control of the conference system and/or control of the interpretation
system
Video:
Display of the synoptic view of the conference room, the delegate names
and the voting results (e.g. via a projector)
Note:
Your network administrator will give you the required TCP/IP addresses
of your PCs.
If the PC is to be configured as the master PC:
In the "Program" box on the "1" tab, click the "Master" option button.
Enter the TCP/IP addresses of the corresponding PCs in the "Master",
"Slave1" and "Video" boxes of the "TCP/IP address" box.
This PC is now configured as the master PC.
Configuring the conference system
35