Table of Contents
Advertisement
Configuring the conference system
28
Configuring VIP units
VIP units are delegate units with special "rights" and privileges:
With a VIP unit, you can take the floor at any time by pressing the MICRO
key, regardless of the conference mode and without first having to be
assigned the "speaking right".
If the chairman presses the PRIOR. key, all active conference consoles –
except for the VIP units – are turned off. The chairman cannot withdraw
the "speaking right" from you.
To assign the VIP status to a conference console:
Make sure that the "VIP enabled" check box on the "Vip" tab shows a
tick.
On the "Vip" tab, click one of the rows in the table of VIP units.
The button for opening the drop down list appears.
Click the drop down list and select the provisional microphone number
of the VIP unit. You can configureup to ten VIP units.
During a conference, VIP units are marked with a blue square in the upper
left corner of the conference console icon. During a conference, these blue
squares can be displayed or hidden by clicking the "VIP: ON" button in the
tool palette.
To withdraw the VIP status from a conference console:
On the "Vip" tab, click the row with the VIP unit to be removed in the
table of VIP units.
The button for opening the drop down list appears.
Press the DELETE key.
The VIP unit is removed from the table.
Advertisement
Table of Contents
