Preparing The Conference System For Use; Connecting The Pc To The Central Unit; Installing The Software - Sennheiser SDC 8000 SYS Software Manual

Hide thumbs Also See for SDC 8000 SYS:
Table of Contents

Advertisement

Preparing the conference system for use

14
Preparing the conference system for use

Connecting the PC to the central unit

Please note that the program for controlling the conference system and
the program for controlling the interpretation system require a separate
RS 232 interface each. Therefore, there are two possibilities for PC
controlling your conference and interpretation system:
1.
You connect a single PC to the central unit:
The PC has two free RS 232 interfaces. Both the program for
controlling the conference system and the program for controlling the
interpretation system are installed on this PC.
Additional slave or video PCs can be connected to the PC's network
card via a local network (LAN).
2.
You connect two PCs to the central unit:
The program for controlling the conference system and the program for
controlling the interpretation system are installed on two different PCs.
Each PC has a free RS 232 interface.
To connect PCs to the central unit:
Make sure that the required serial interfaces are available and free. The
required interfaces must appear in the Windows Device Manager under
"Ports (COM & LPT)". These interfaces
software.
Use one zero modem cable to connect the serial interface of the PC via
which the conference system is to be controlled to the COM 3 interface
of the central unit.
Use the second zero modem cable to connect the serial interface of the
PC via which the interpretation system is to be controlled to the COM 1
interface
of the central unit.
Attention!
After you have connected the PC to the central unit, your conference
and interpretation system can be controlled via both the PC and the
central unit!
In order to avoid inconsistencies, please make sure that no parameters
are changed on the central unit!

Installing the software

To install the software on your PC or on different PCs in your network,
proceed as follows:
Attention!
If you want to install a newer version of the software, you first have to
remove the old version!
must not
be used by any other

Advertisement

Table of Contents
loading

Table of Contents