If Problems Occur; The Conference And Interpretation System Does Not React On The Software; Some Consoles Do Not Work; Accessories - Sennheiser SDC 8000 SYS Software Manual

If problems occur...

The conference and interpretation system does not react on the software

If the "No communication" dialog box appears:
See "Configuring communication with the central unit" on page 38.
See "Setting the correct starting options" on page 16.
If the "No key found" dialog box appears:
See "Connecting the dongle" on page 16.
If the "Waiting for master..." dialog box appears when the program is
started for the first time:
See "Setting the correct starting options" on page 16.
If the "Waiting for master..." dialog box appears when the program is
started for the second time or later:
See "Configuring the PC in a network" on page 35 and "Configuring the
COM port" on page 38.

Some consoles do not work

Check if there are entries in the "#Errors" box of the control palette or
if consoles are displayed in yellow in the synoptic view.
Make sure that these consoles are connected correctly.
If correctly connected consoles are displayed in yellow in the synotic
view, these consoles are defective and have to be replaced.

Accessories

Licenses for software modules

9848 SDC 8000 SYS: Complete software package (includes all five modules)
9850 SDC 8000 S-MM: Software module "Microphone Management"
9854 SDC 8000 S-DM: Software module "Delegate Management"
9851 SDC 8000 S-VM: Software module "Voting Management"
9852 SDC 8000 S-VD: Software module "Voting Display"
9853 SDC 8000 S-IM: Software module "Interpreter Management"
If problems occur...
93