Reading Chip Cards; Changing Chip Card Data; Ending The Program - Sennheiser SDC 8000 SYS Software Manual

Reading chip cards

Insert the chip card into the chip card slot of any desired console. The
chip must point downwards.
The green LED on the chip card icon of the corresponding consoles
lights up. The consoles with a chip card inserted into their chip card slot
are displayed in white in the synoptic view.
From the "Configuration" menu, choose "Badge programming".
The input mask opens.
In the "Micro No." field, enter the four-digit microphone number of the
console whose inserted chip card you want to read.
Click the "Read" button.
The data on the chip card are read and displayed in the input mask.

Changing chip card data

Read the chip card as described in the previous section.
The data on the chip card are displayed in the input mask.
Change the desired data by editing them in the input mask.
Click the "Write" button.
The changed data are written to the chip card.

Ending the program

To end the program:
Click "End" on the menu bar.
The program is ended. If consoles are active when you exit the program,
they remain active. The conference is not interrupted, but is now
controlled via the central unit only.
Voting
73