Upgrading The Software License - Sennheiser SDC 8000 SYS Software Manual

Upgrading the software license

To upgrade the software license:
Make sure that the dongle is inserted into the correct port of your PC.
Click and select
click
The "Field exchange utility" window opens.
Click the "Get Locking Code" button.
The code is displayed in the box above the button.
To save this code in a file:
Click the "Save locking code to a file" icon (
To copy the code to the clipboard:
Click the "Copy to Clipboard" icon (
Send this code (by email or by fax) to your Sennheiser distributor.
Within five days, you will receive the new license in the form of a license
code.
Enter this license code in the box above the "Update License" button.
To avoid typing errors:
Use the "Paste from Clipboard" icon (
email and copied to the clipboard in the box.
If the new license code is saved in a file, click the "Load license code
from a file" icon ( ).
To enable the license:
Make sure that the dongle is inserted into the correct port of your PC.
Click the "Update License" button.
Close the "Field exchange utility" window and start the software.
Note:
For further information, click the "Help" button.
Upgrading the software license
and
.
).
) to paste the code received by
one after the other. Then
).
91