Testing The Loudspeakers Of The Conference Consoles - Sennheiser SDC 8000 SYS Software Manual

Example:
"C:\Programs\SDC8000\S_CM\Data\File.txt","2004-
01-01","12:00:00",""
"Micro","Badge","Name","Party"
4,1,"Archer","USA"
5,2,"Becker","GER"
6,3,"Miller","CAN"
To print the data of all inserted chip cards:
From the "Present Badges" menu, choose "Print".
All inserted chip cards are read and the data are printed in the order of
the microphone numbers.

Testing the loudspeakers of the conference consoles

To test the loudspeakers of the connected conference consoles:
From the "Test" menu, choose "Test Generator ON".
The "Test Generator ON" button is displayed. All active consoles are
deactivated automatically. The central unit transmits a test tone which
is reproduced by all operational conference consoles.
To end the loudspeaker test:
From the "Test" menu, choose "Testgenerator OFF" or click the "Test
Generator ON" button.
The "Test Generator ON" button disappears and the test tone stops.
To test the microphones of the connected conference consoles:
From the "Test" menu, choose "Test all Microphones".
The "Test all Microphones" button is displayed.
All active consoles are deactivated automatically. All operational
consoles are activated for approx. 1 second each. The microphone
number of the currently active console is displayed on the "Test all
Microphones" button and the signal light ring on the currently active
console lights up.
To end the microphone test:
From the "Test" menu, choose "End Test all Microphones" or click the
"Test all Microphones" button.
The "Test all Microphones" button disappears and the microphone test
is ended.
Monitoring and controlling a conference
61