System Requirements; Hardware Required - Sennheiser SDC 8000 SYS Software Manual

Hide thumbs Also See for SDC 8000 SYS:
Table of Contents

Advertisement

System requirements

12
System requirements

Hardware required

Processor:
Intel Pentium 4 or AMD Athlon XP, 2 GHz or more
RAM:
256 MB min. (512 MB recommended)
Hard disk:
min. 30 MB free hard disk memory
Drives:
CD ROM or DVD ROM drive
drive for data backup (e.g. floppy disk drive,
CD recorder or ZIP drive)
Interfaces:
at least one free RS 232 interface (serial interface)
(see note below)
Sound card:
quality stereo sound card
Screen resolution:
exactly 1024
(see note below)
Network:
optional 10/100/1000 Base Ethernet
Note on the RS 232 interfaces:
You only require one free RS 232 interface per PC if:
you only control conference consoles via the software and not
interpreter consoles (you have not licensed the S-IM software
module),
you use two different PCs to control the conference and
interpretation system (each PC has an RS 232 interface of its own),
you use only one PC to control both the conference system and the
interpretation system and have to constantly change the interface
via which the PC is connected to the central unit (the COM 3 interface
of the central unit to control the conference system and the COM 1
interface to control the interpretation system).
You require two free RS 232 interfaces if:
you want to use only one PC to control both the conference system
and the interpretation system without having to constantly change
the interface via which the PC is connected to the central unit.
Note on the screen resolution:
We recommend setting your screen resolution to exactly 1024
pixels!
×
768 pixels
×
768

Advertisement

Table of Contents
loading

Table of Contents